Dust Collectors

BCE has standard lines of dust collector bag filters predesigned for competitive pricing and quick turn-around. BCE also offers custom configured filter bags for any application.Configure a Custom Filter Bag

Standard pressure ratings are ±20" W.G. for flat-walled collectors and up to 17" Hg for round units. See these pages for descriptions and general drawings of BCE standard fabric filter dust collectors:

C-Series: Cylindrical, 7 to 154 bags, up to ±17" Hg design
S-Series: Square, 9 to 400 bags, ±20" W.G. design
R9-Series: Rectangular, 126 to 234 bags, 9-bags deep, ±20" W.G. design
R14-Series: Rectangular, 252 to 420 bags, 14-bags deep, ±20" W.G. design

Where custom collectors are needed, BCE is fully capable to design, build and install everything from single units to entire systems, specific to your application. If high-pressure units are required, our engineers have decades of combined experience designing dust collectors to the ASME Code, Section VIII, Divisions 1 and 2. Call us to discuss your requirements.

Pleated Filters:For many applications where the dust is free-flowing and non-agglomerating, a collector with 6" diameter pleated filters is an economical choice over a bag filter. Although pleated filters operate at lower air-to-cloth ratio than bag filters, the large filter area per element typically results in a significantly smaller housing size. Call BCE and we will be happy to discuss whether a pleated filter is right for your application.

Cartridge Filters:Large cartridge filters are ideal for low-temperature applications with a small dust loading and large air volume. As with pleated filters, cartridges provide a large filter area per element resulting in a compact unit, requiring much less headroom than a bag filter of comparable capacity. BCE uses a downflow design to promote dust settling and maximize the air-to-cloth ratio.